Front Cross-Member: Service and Repair

TRANSVERSE MEMBER REMOVAL/INSTALLATION








1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.

FRONT CROSSMEMBER REMOVAL/INSTALLATION
1. Remove the front exhaust pipe.
2. Remove the engine mount member.
3. Remove the steering gear and linkage.
4. Remove the front lower arm.








5. Remove in the order of removal.
6. Install in the reverse order of removal.
7. Inspect the front wheel alignment as necessary.

CROSSMEMBER COMPONENT REMOVAL NOTE
1. Support the crossmember using a jack and remove the bolts and nuts.
2. Remove the crossmember component.