Latch Position Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the sliding door trim.
Partially peel off the door screen.
Disconnect the latch position switch connector.
Inspect for continuity between the latch position switch terminals using an ohmmeter.
- If not as specified, replace the sliding door lock.
  
  Fig 1: Latch Position Switch Continuity Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying Latch Position Switch Terminals Connection
  Courtesy of MAZDA MOTORS CORP.