LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (HVAC System) >> Control System >> Front Blower Relay Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Blower Relay Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Because the lock section of the unit is damaged easily, do not remove the remove the front blower relay from the bracket unless replacement is necessary. Always perform an inspection of the front blower relay before removal.
  1. Disconnect the negative battery cable.
  2. Remove in the order indicator in the illustration.
    Fig 1: Removal Order Of Front Blower Relay
    G00992174Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Front Blower Relay
    G00992175Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.