Power Window Main Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
When inspecting the passenger's side and the rear, verify that the power-cut switch is at UNLOCK.
Inspect for continuity between the power window main switch terminals using an ohmmeter.
- If not as specified, replace the power window main switch.
Fig 1: Power Window Main Switch Terminals Continuity Specifications - Driver's Side
Courtesy of MAZDA MOTORS CORP.

Fig 2: Power Window Main Switch Terminals Continuity Specifications - Passenger's Side
Courtesy of MAZDA MOTORS CORP.

Fig 3: Identifying Power Window Main Switch Circuits, Terminals & Connector View
Courtesy of MAZDA MOTORS CORP.

Fig 4: Power Window Main Switch Terminals Continuity Specifications - Rear Right
Courtesy of MAZDA MOTORS CORP.

Fig 5: Power Window Main Switch Terminals Continuity Specifications - Rear Left
Courtesy of MAZDA MOTORS CORP.

Fig 6: Power Window Main Switch Terminals Continuity Specifications - Power-Cut Switch
Courtesy of MAZDA MOTORS CORP.