LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Automatic Transmission [Shift Mechanism)) >> Selector Lever Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Component Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover.
  2. Remove the battery cover.
  3. Disconnect the negative battery cable.
  4. Remove the ashtray. (See CONSOLE REMOVAL/INSTALLATION .)
  5. Remove the shift knob. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
  6. Remove the console panel and indicator assembly. (See SELECTOR LEVER REMOVAL/INSTALLATION .)
  7. Disconnect the selector lever component connector.
  8. Verify continuity as indicated in the table.
    Fig 1: Selector Lever Components Terminals Continuity Table
    G01346926Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Selector Lever Components Connector Terminals
    G01346927Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals