Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION )
Remove in the order indicated in the illustration.

Fig 1: Washer Fluid-Level Sensor Removal Order Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing Washer Fluid-Level Sensor
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.