LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 363 (Symptom Troubleshooting (Engine Control System L3)) >> Engine Control System Operation Inspection >> Variable Valve Timing Control System Operation Inspection >> When idling cannot be continued
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When idling cannot be continued

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil control valve (OCV) and verify that the spool valve is at maximum retard position.
  2. Connect the oil control valve (OCV).
  3. Turn the ignition switch to ON position.
  4. Verify that the spool valve is at maximum retard position.
    • If the spool valve is stuck in the advance direction, inspect for the following:
      • Short circuit in harnesses or connectors between the oil control valve (OCV) and the PCM.
  5. Inspect the variable timing actuator.
scientia non olet · About LEMON Manuals