LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Washer System & Wiper System) >> Washer Fluid-Level Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Washer Fluid-Level Sensor Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION [SEDAN]  .) (See WASHER TANK REMOVAL/INSTALLATION [5-DOOR, SPORT WAGON]  .)
  3. Remove in the order indicated in the table.
    Fig 1: Washer Fluid-Level Sensor Removal Sequence
    G03645642Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals