Front Climate Control Unit Inspection: Notes
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Slide out the front climate control unit with the connectors still connected. (See FRONT CLIMATE CONTROL UNIT REMOVAL )
- Measure the voltage at each front climate control unit terminal and refer to the TERMINAL VOLTAGE TABLE .
- Disconnect the front climate control unit connector before inspecting for continuity at terminal D.
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harnesses.
- If the parts and wiring harnesses under "Inspection item(s)" are found to be normal, replace the front climate control unit.
- If there is any malfunction, inspect the parts listed under "Inspection item(s)" and the related wiring harnesses.