Restraints Control Module (RCM): Removal
WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . The RCM module is located on center tunnel under utility tray. Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.
- Unscrew 2 retainers and remove utility tray (cup holder). Remove 2 bolts securing RCM bracket to right side of tunnel. Slide RCM connector locking clip and disengage. See Figure . Disconnect RCM electrical connector. Remove 2 bolts securing RCM bracket to left side of tunnel. Remove RCM with bracket.