Resistor Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the resistor connectors.
Inspect for continuity between the resistor terminals using a tester.
- If there is any malfunction, replace the resistor.
  
  Fig 1: Resistor Terminal Connector Continuity
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Inspecting For Continuity Between Resistor Terminals
  Courtesy of MAZDA MOTORS CORP.