Front Fog Light Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the light switch. (See LIGHT SWITCH REMOVAL/INSTALLATION .)
Inspect for continuity between the light switch terminals using an ohmmeter.
- If not as specified, replace the light switch.
  
  Fig 1: Front Fog Light Switch Continuity Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Front Fog Light Switch Circuit Diagram And Connector Terminals
  Courtesy of MAZDA MOTORS CORP.