When Idling Cannot Be Continued
WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Oil Control Valve (OCV) and verify spool valve is at maximum retard position. If spool valve is stuck in advance direction, replace OCV. See VARIABLE VALVE TIMING ACTUATOR under VARIABLE VALVE TIMING in REMOVAL & INSTALLATION article.
- Connect OCV.
- Turn ignition on.
- Verify spool valve is at maximum retard position. If spool valve is stuck in advance direction, inspect for short circuit in harnesses or connectors between OCV and PCM.
- Inspect Variable Valve Timing (VVT) actuator.