Fuel Pump Resistor Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the secondary air injection (AIR) pump. SECONDARY AIR INJECTION (AIR) PUMP REMOVAL/INSTALLATION .)
Remove in the order indicated in the figure. See Fig 1.
Install in the reverse order of removal.

Fig 1: Removal Order Of Fuel Pump Resistor
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing Fuel Pump Resistor
Courtesy of MAZDA MOTORS CORP.