LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Fuel System) >> Fuel Tank Removal/Installation >> Fuel-Filler Pipe Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel-Filler Pipe Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear ABS wheel-speed sensor. (See REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION .)
  2. Remove the rear shock absorber lower bolt. (See REAR SHOCK ABSORBER & COIL SPRING REMOVAL/INSTALLATION
  3. Loosen the rear crossmember installation nut (6 locations), and lower the rear crossmember.
  4. Remove the fuel-filler pipe.
scientia non olet · About LEMON Manuals