Rollover Valve: Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

A checker tab is integrated with the quick release connector for new fuel hoses.
The checker tab will be released from the quick release connector after it is completely engaged with the fuel pipe.

Inspect the fuel hose and fuel pipe sealing surface for damage and deformation, and replace as necessary.

Fig 1: Pushing Quick Release Connector Into Fuel Pipe
Courtesy of MAZDA MOTORS CORP.
- If the quick release connector O-ring is damaged or has slipped, replace a new fuel hose.
Push the quick release connector into the fuel pipe until a click is heard.
Pull the quick release connector by hand and verify that it is installed securely.