Magnetic Clutch Adjustment

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Measure the clearance around the entire circumference between the pressure plate and A/C compressor pulley using a feeler gauge.
Inspect the clearance.
- If not within the specification, adjust the clearance by changing the shim (0.2 mm {0.008 in}, 0.5 mm {0.02 in}) or the number of shims.
Fig 1: Adjusting Magnetic Clutch
Courtesy of MAZDA MOTORS CORP.

Standard clearance

0.20-0.45 mm {0.008-0.017 in}