Fuse Block Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
Remove in the order indicated in the figures.

Fig 1: Removing/Installing Fuse Block (Legend)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing Fuse Block
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.