Vibration Method: Notes

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

If a malfunction occurs or becomes worse while driving on a rough road or when the engine is vibrating, perform the steps below.

NOTE:

There are several reasons why vehicle or engine vibration could cause an electrical malfunction. Some of the things to check for are:
- Connectors not fully seated.
- Wiring harnesses not having full play.
- Wires laying across brackets or moving parts
- Wires routed too close to hot parts.
An improperly routed, improperly clamped, or loose wiring harness can cause wiring to become pinched between parts.
The connector joints, points of vibration, and places where wiring harnesses pass such as through the firewall and body panels are the major areas to be checked.