Trunk Compartment Light Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The trunk compartment light switch is built into the trunk lock.

Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
Disconnect the trunk compartment light switch connector.
Verify that the continuity between the trunk compartment light switch terminals is as indicated in the table.
- If not as indicated in the table, replace the trunk lock.
Fig 1: Trunk Compartment Light Switch Terminal And Continuity Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Checking Continuity Between Trunk Compartment Light Switch Terminals
Courtesy of MAZDA MOTORS CORP.