Ignition Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
Disconnect the ignition switch connector.
Inspect for continuity between the ignition switch terminals using an ohmmeter.
- If not as specified, replace the ignition switch.
Fig 1: Ignition Switch Terminal Connector Continuity
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting For Continuity Between Ignition Switch Terminals Using An Ohmmeter
Courtesy of MAZDA MOTORS CORP.