LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Instrumentation/Driver Info) >> Instrument Cluster Input/Output Check Mode >> Operating Order
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operating Order

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Wait 30 seconds or more have passed after disconnecting the negative battery cable and connect the cable then operate the input/output check mode again after terminating the input/output check mode.
  1. Close the all doors.
  2. Disconnect the negative battery cable.
  3. Open the driver's side door.
  4. Connect the negative battery cable.
  5. Perform the following procedures within 30 seconds  , after connecting the negative battery cable.
    1. Turn the ignition switch to the ON position.
    2. Push the door switch 3 times.
    3. Push the odometer/tripmeter switch 3 times.
    Fig 1: Identifying Odometer/Tripmeter Switch
    G03639083Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals