Swing Louver Inspection

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.

Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION
Connect battery positive voltage to terminal B and ground to terminal A of the swing louver.
Verify that the swing louver operates as indicated in Fig 1 .
- If not as specified, replace the swing louver.
  
  Fig 1: Swing Louver Switch Position Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Identifying Swing Louver Switch Circuit & Connector View
  Courtesy of MAZDA MOTORS CORP.