Washer Fluid-Level Sensor Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Inspect for continuity between the washer fluid-level sensor terminals using an ohmmeter.
- If not as specified, replace the washer fluid-level sensor.
Fig 1: Checking Continuity Between Washer Fluid-Level Sensor Terminals
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Washer Fluid-Level Sensor
Courtesy of MAZDA MOTORS CORP.