Relay Inspection

RELAY INSPECTION

Relay Inspection:

Relay Type

Four Terminal

Type A
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type B
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type C
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type D
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Five-terminal

Type A
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Type B
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.

Eight-terminal
1. Remove the relay.







2. Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.