Control Module HVAC: Testing and Inspection

A/C AMPLIFIER INSPECTION






NOTE: A/C amplifier controls A/C signal as shown in the figure.

1. Remove the glove compartment.
2. Pull out the A/C amplifier with the connector still connected.
3. Turn the ignition switch to ON position.

Terminal A - F:

4. Measure the voltage at each A/C amplifier terminal or climate control unit terminal and refer to the terminal voltage list.
- If not as specified, inspect the parts listed under "Action" and the related wiring harness.
- If there is no malfunction under "Action", replace the A/C amplifier.