Brake Lines Disconnection/Connection
CAUTION:
- Brake fluid will damage painted surfaces. If brake fluid gets on a painted surface, wipe it off immediately.
- Tighten the brake pipe flare nut by using the SST (49 0259 770B). Be sure to modify the brake pipe flare nut tightening torque to allow for use of a torque wrench-SST combination. (See 00-00-15 Torque Formulas.)
- If any brake line has been disconnected anytime during the procedure, add brake fluid, bleed the brakes, and inspect for leakage after the procedure has been completed.