LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Self-Diagnostic System >> Input/Output Check Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Check Mode

NOTE: Access DTC's in numerical order. If a lower number DTC needs to be accessed, discontinue test and start over.
  1. Turn ignition switch to LOCK position. Disconnect negative battery cable. After more than 30 seconds, reconnect negative battery cable. Cycle ignition switch to ON position, then LOCK position, 3 times. Turn ignition switch to ON position. Push trip reset button 3 times.
  2. Push trip reset button to select appropriate DTC. DTC's are displayed on trip/odometer LCD. See DTC DEFINITIONS  table. Inspect DTC by following procedures under appropriate diagnostic test. See DIAGNOSTIC TESTS  . To cancel input/output check mode, turn ignition to LOCK position, then back to ON position.
scientia non olet · About LEMON Manuals