Instrument Cluster Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Pull down the adjusting lever of the tilt steering wheel and push the steering wheel down.
Remove the meter hood.
Pull down the selector lever to the D range position,
Remove in the order indicated in the figure.

Fig 1: Removing/Installing Instrument Cluster (Legend)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Removing/Installing Instrument Cluster
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.