LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 404 (Front Suspension System) >> Front Lower Arms Removal/Installation >> Clip Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clip Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wipe the grease off the ball joint stud.
  2. Fill the inside of the new dust boot with grease.
  3. Install the dust boot to the ball joint.
  4. Install the clip using the SST. 
  5. Verify that the clip is installed securely to the groove.
  6. Wipe off any excess grease.
    Fig 1: Installing The Dust Boot And Clip
    G03702171Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals