LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Front Suspension System) >> Front Lower Arm >> Removal/Installation >> Clip Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Clip Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Wipe the grease off the ball joint stud.
  2. Fill the inside of the new dust boot with grease.
  3. Install the dust boot to the ball joint.
  4. Install the clip using the SST
    Fig 1: Installing Clip
    G00379022Courtesy of MAZDA MOTORS CORP.
  5. Verify that the clip is installed securely to the groove.
  6. Wipe off any excess grease.
scientia non olet · About LEMON Manuals