LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Door Lock Control Module Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Door Lock Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Remove the bolt.
  4. While inclining the door lock control module along the body panel in the direction indicated by the arrow, disengage the bracket tab from the hole in the body panel.
  5. Disconnect the door lock control module connector.
  6. Remove the door lock control module.
    Fig 1: Removing Door Lock Control Module And Module Connector
    G01931117Courtesy of MAZDA MOTORS CORP.
  7. Remove the screw, then remove the bracket.
    NOTE:
    • The screw which fixes the door lock control module and bracket is for a body ground connection. Be sure to secure the screw when installing.
  8. Install in the reverse order of removal.
    Fig 2: Removing Door Lock Control Module Bracket Screws
    G01931118Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals