Coolant Temperature Sensor/Switch (For Computer): Service and Repair

ENGINE COOLANT TEMPERATURE SENSOR REMOVAL/INSTALLATION

1. Disconnect negative battery cable.
2. Partially drain the cooling system. See ENGINE COOLANT REPLACEMENT.
3. Disconnect engine coolant temperature (ECT) sensor connector.

NOTE: The 2.3L engine has a CHT sensor. See CYLINDER HEAD TEMPERATURE (CHT) SENSOR REMOVAL/INSTALLATION - 2.3L.




4. Remove the ECT sensor.
5. Install in reverse order of removal.

Tightening torque: 16 - 24 N.m {1.6 - 2.4 kgf.m, 12 - 17 ft.lbf}