LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Cruise Control System) >> System Tests >> Test 4: Set/ACCEL Switch Is Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 4: Set/ACCEL Switch Is Inoperative

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to LOCK position. Disconnect cruise control servo harness connector. While pressing cruise control SET/ACCEL switch, measure resistance between terminals No. 5 (Light Blue/Black wire) and No. 6 (Dark Green/Orange wire) at cruise control servo harness connector. See Figure . If resistance is 612-748 ohms, replace cruise control servo. See CRUISE CONTROL SERVO  under REMOVAL & INSTALLATION. If resistance is not 612-748 ohms, replace cruise control switch. See CRUISE CONTROL SWITCHES  under REMOVAL & INSTALLATION. After repair, perform RETRIEVING FLASH CODES  under SELF-DIAGNOSTIC SYSTEM.

scientia non olet · About LEMON Manuals