Power Window Main Switch Inspection

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window main switch. (See POWER WINDOW SWITCH REMOVAL/INSTALLATION .)
When inspecting the passenger's side and the rear, turn the power-cut switch UNLOCK.
Inspect for continuity between the power window main switch terminals using an ohmmeter.
- If not as specified, replace the power window main switch.
Fig 1: Power Window Main Switch Terminals Continuity Chart
Courtesy of MAZDA MOTORS CORP.