Check code 31
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
CHECK CODE 31 DIAGNOSTIC PROCEDURES
| Check code 04 | Door switch ON/OFF signal | ||
|---|---|---|---|
| STEP | INSPECTION CONDITION | DISPLAY | ACTION |
| 1 | Remove the key from the steering lock, then reinsert the key into the steering lock after selecting check Code 31. (The key Reminder switch is on.) | on | Go to next step. |
| OFF | Verify that the voltage of instrument cluster terminal 2W is B+.
|
||
| 2 | Remove the key from the steering lock. (The key Reminder switch is off.) | on | Verify that the voltage of the instrument cluster terminal 2W is 1.OV or less.
|
| OFF | Input signal to the instrument cluster is normal. | ||