Dust Boot installation Note
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Fill the inside of the new dust boot with grease.
- Press the dust boot on using a 30 mm {1.18 in}
socket until the dust boot contacts the seat.CAUTION:
- Install the dust boot squarely and do not press excessively. The inner metal ring will be deformed if not done correctly.
- Verify that the clearance between the boot and the seat is less than 1 mm {0.04 in}.