Base Removal

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rearview mirror.
Wind each end of the SST (piano wire) around a bar.
WARNING:
- Using the SST (piano wire) with bare hands can cause injury. Always wear gloves when using the SST (piano wire).
NOTE:
- Use the entire length of the SST (piano wire) to prevent it from breaking when cutting through the sealant.
Saw through the sealant to remove the base.

Fig 1: Sawing Through Sealant Of Base

Courtesy of MAZDA MOTORS CORP.