Reusing Windshield
- Make a hole through the sealant from the inside of the vehicle using an awl.
WARNING:
- Using a SST (piano wire) with bare hands can cause injury. Always wear gloves when using a SST (piano wire).
- Pass the SST
(piano wire) through the hole.
- Wind each end of the SST
(piano wire) around a bar.
NOTE:
- Use a long sawing action to spread the work over the whole length of the SST (piano wire) to prevent it from breaking.
Courtesy of MAZDA MOTORS CORP.
- Working with another person, saw through the sealant around the edge of the glass.
Courtesy of MAZDA MOTORS CORP.
- Remove the windshield.
- Remove the dam from the windshield.
- Remove the protector.
- Remove the spacers.
Courtesy of MAZDA MOTORS CORP.