LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE .)
  3. Disconnect the cruise control switch connector.
  4. Remove in the order indicated in the figure.
    Fig 1: Removing Cruise Control Switch
    G01913695Courtesy of MAZDA MOTORS CORP.
    Fig 2: Cruise Control Switch Removal Sequence
    G01913694Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals