LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege L4-2.0L DOHC >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Service and Repair
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Refrigerant Pressure Sensor / Switch: Service and Repair

REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the receiver/drier.




3. Remove the refrigerant pressure switch. (See Refrigerant Pressure Switch Installation Note)
4. Install in the reverse order of removal.

Refrigerant Pressure Switch Installation Note

1. Apply compressor oil to the O-ring and connect the joint.
scientia non olet · About LEMON Manuals