Power Window Subswitch

POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION

Passenger's side




1. Disconnect the negative battery cable.
2. Remove the passenger-side front door trim.
3. Push out the clip from the reverse side of the trim, and remove the switch panel.
4. Remove the screw, and remove the power window subswitch.
5. Install in the reverse order of removal.

Rear




1. Disconnect the negative battery cable.
2. Remove the tab by inserting a tape-wrapped, flathead screwdriver between the switch and the rear door trim.
3. Disconnect the connector, and remove the power window subswitch.
4. Install in the reverse order of removal.