LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transaxle Shift Mechanism) >> Selector Lever Removal/Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Removal/Installation: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Disconnect the brake switch connector.
  4. Remove in the order indicated in the figure.
  5. Install in the reverse order of removal.
Fig 1: Removing Procedure Selector Lever - 4AT
G01914524Courtesy of MAZDA MOTORS CORP.
Fig 2: Removing Procedure Selector Lever - Sport AT
G01914525Courtesy of MAZDA MOTORS CORP.