Audio Unit Installation: Standard

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Make certain that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the harness or the antenna feeder is caught between the unit and dashboard, it may become the cause of trouble or malfunctions.

Connect the connectors and antenna jack.
Insert the unit until each clip clicks into place.
CAUTION:
- To install audio unit, be sure to push service hole cover areas on both sides of the audio unit. If switches are pressed instead, it may become the cause of trouble or malfunctions.
Install the service hole covers.
Connect the negative battery cable.

Fig 1: Installing Audio Unit (Standard)
Courtesy of MAZDA MOTORS CORP.