LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute ES, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Generators & Regulators) >> Generator Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Generator Specifications

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR MAXIMUM RATED OUTPUT SPECIFICATIONS

Application Specification
Brush Length
Standard 0.73" (18.5 mm)
Minimum 0.20" (5.0 mm)
Brush Spring Force
Standard 1.06 lbs. (4.8-6.0 N)
Minimum 0.48 lbs. (2.2 N)
Generated Current At Terminal B (Reference)
At 1000 RPM (1) 0-59 Amps
At 2000 RPM (1) 0-77 Amps
Rotor Resistance (2) 2.5-2.9 Ohms
Standard Voltage (3)
Terminal B Battery Voltage
Terminal P About 1 Volt
Terminal D About Zero
Voltage (4)
Terminal B 13-15 Volts
Terminal P About 3-8 Volts
Terminal D (5)
(1) Must be more than zero amps.
(2) Measured between slip rings.
(3) Ignition switch in ON position.
(4) At idle.
(5) Turn headlights, blower motor and rear window defroster on and verify that the voltage reading increases.