LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2003 >> Tribute ES, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Shift Mechanism >> Selector Lever >> Removal and Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal and Installation

  1. Remove the air bag sliding contact (clockspring). Refer to AIR BAG RESTRAINT SYSTEMS
  2. Remove the multifunction switch. Refer to STEERING COLUMN MULTIFUNCTION SWITCH .
  3. Remove the windshield wiper/washer switch. Refer to WINDSHIELD WIPER/WASHER SWITCH .
    Fig 1: Disconnecting Gearshift Cable
    G01902084Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the gearshift cable.
    Fig 2: Disconnecting Electrical Connector
    G01902085Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the electrical connector.
    Fig 3: Removing Bolts And Gearshift Lever Assembly
    G01902086Courtesy of MAZDA MOTORS CORP.
  6. Disconnect the wiring harness from the gear shifter assembly.
    7. Fig 4: Removing Bolts And Gearshift Lever Assembly
    G01902087Courtesy of MAZDA MOTORS CORP.
  7. Remove the bolts and the gearshift lever assembly.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals