LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel System >> Fuel Pump Unit Removal/Installation >> Retainer ring installation note
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Retainer ring installation note

  1. Tap a retainer ring projection using a flathead screwdriver as shown in the figure and tighten the retainer until it is fixed in place.
    Fig 1: Installing Retainer Ring
    G00973862Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals