LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> Body & Frame >> Glass/Windows/Mirrors >> Power Window SUBSWITCH Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Window SUBSWITCH Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the clips B using a flathead screwdriver wrapped with protective tape.
  3. Remove the switch panel from the door trim while sliding it in the direction of the arrow as shown in the figure.
  4. Disconnect the power window subswitch connector.
    Fig 1: Locating Power Window Subswitch Clip & Tabs
    G02566722Courtesy of MAZDA MOTORS CORP.
  5. Remove the screws, then remove the power window subswitch.
  6. Install in the reverse order of removal.
    Fig 2: Removing/Installing Power Window Subswitch
    G02566723Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals