A/C Cut-Off Control System Inspection

Start the engine.
Turn the A/C switch and the fan switch on.
Verify that the A/C compressor magnetic clutch actuates.
- If it does not actuate, go to symptom troubleshooting No. 23 A/C DOES NOT WORK SUFFICIENTLY .
Fully open the throttle valve and verify that the A/C compressor magnetic clutch does not actuate for 2-5 s .
- If it actuates, inspect as follows:
  - A/C relay.
  - Open or short to GND circuit in wiring harness and connectors (Ignition switch-A/C relay-PCM terminal 1AN).
  - A/C related parts.
  - APP1, APP2 PIDs.