LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Instrumentation/Driver Info) >> Information Display Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Information Display Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  4. Remove the center panel module. (See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
  5. Remove the LCD unit. (See LCD UNIT REMOVAL/INSTALLATION
  6. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Information Display
    G01344802Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
    Fig 2: Removing/Installing Information Display
    G01344803Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals